Introducing the Chisum Workhorse

Join the Chisum Family and Let Us Show You What Value Is!

You will see a new product of exceptional quality—from the raw materials to the manufacturing to the service and support.

Workhorse 360 VIEW

Raised Position
Drive-Up Position
Lowered Position
Pull Tower
Raised Position
Raised Position
Drive-Up Position
Drive-Up Position
Lowered Position
Lowered Position
Pull Tower
Pull Tower

RAISED POSITION

DRIVE-UP POSITION

LOWERED POSITION

TOWER

Not All Bench Style Racks Are Created Equal

RAMPS

RAMPS

Chisum Workhorse removable ramps not only allow for great access to the vehicle -- they come standard wider than the competitors, at a width of 92”. A heavy-duty truck or SUV will fit on the Workhorse with ease.

  • 1 of 9
MOUNTING ARMS

MOUNTING ARMS

We designed the mounting arms wider, allowing the clamping of a wide uni body-constructed vehicle without the need of inverting the bench chassis clamps. The top of the arms, and the mounting service, are milled to tolerances that are measured in + or – 0.15 mm.

  • 2 of 9
LENGTHS

LENGTHS

The Workhorse comes in two sizes to choose from: 19 feet and 16.5 feet. Repairing any car, SUV or light truck is simple on the Workhorse 19-foot model.

  • 3 of 9
GLOBAL CONSTRUCTION

GLOBAL CONSTRUCTION

The Chisum Workhorse has been in development for 4 years and is truly a global concept. Materials and assembly have covered nearly every continent of the world.

  • 4 of 9
STRONGER LIFT CAPACITY

STRONGER LIFT CAPACITY

The Workhorse will lift an incredible 10,200 lbs., meeting the demand of many OEM requirements today. The entire lift is constructed with WL510 steel material. The lift arms are composed by two CNC pieces leading to virtually zero deviation. The lift is then heat treated to remove internal stresses and toughen the steel. This effort is done on every single Workhorse produced and is one of the reasons for the extortionary lifting capacity of the rack.

  • 5 of 9
SMARTER & SAFER

SMARTER & SAFER

An industry first in workplace safety, the Workhorse power unit will lift itself out of a locked position when pressing the down button on the pendant or on the power unit itself.

  • 6 of 9
COMPATIBLE

COMPATIBLE

The construction of the Workhorse allows it to be compatible with bench accessories from leading manufacturers like Snap-On, UnoLiner and Car-o-Liner.

  • 7 of 9
MULTIPLE PULLING

MULTIPLE PULLING

Add as many pull towers as needed to get the job done. The Workhorse is designed to perform multiple pulls simultaneously and at 360-degrees around the bench. 10 Tons of pulling power on each pull tower, with a down pull attachment built directly into the pull tower, allow for better down pulling angles for the repair.

  • 8 of 9
THE FINISH

THE FINISH

The entire structure of the bench is factory shot-blasted, followed by a process of electrophoresis that helps with cleaning and degreasing and creates an etched rust-free surface that is ideal for the powder-coating process that follows.

  • 9 of 9

VIDEO OVERVIEW OF THE WORKHORSE

Play Video

WORKHORSE 5 SPECIFICATIONS

  • Length

    16’ 5” Bench
    19’ 5” Bench with approach ramps
    23’ 5” Bench with approach ramp + 1 tower at front
    24’ 5” Bench with 2 towers (front + rear)

  • Width

    7’ 8” Bench including treadways (left + right)
    9’ 8” Bench with 1 tower
    11’ 8” Bench with 2 towers (one on each side)

  • Working Height

    16” Drive-on minimum
    48” Working maximum

  • Pulling Power

    10 tons of pulling force

  • Lift Capacity

    10,200 lbs.

  • Lift Hydraulics

    Electric Hydraulic

  • Pulling Hydraulics

    Air/ hydraulic pumps

WORKHORSE 6 SPECIFICATIONS

  • Length

    19’ Bench
    23’ Bench with approach ramps
    27’ Bench with approach ramp + 1 tower at front
    28’ Bench with 2 towers (front + rear)

  • Width

    7’ 8” Bench including treadways (left + right)
    9’ 8” Bench with 1 tower
    11’ 8” Bench with 2 towers (one on each side)

  • Working Height

    16” Drive-on minimum
    48” Working maximum

  • Pulling Power

    10 tons of pulling force

  • Lift Capacity

    10,200 lbs.

  • Lift Hydraulics

    Electric Hydraulic

  • Pulling Hydraulics

    Air/ hydraulic pumps