Chisum Is Proud To Present
The CMO Rivet Guns
The CMO RV/EP-02
The CMO RV700
FORD, JAGUAR, LAND ROVER, LINCOLN & ASTON MARTIN APPROVED
FORD APPROVES the CMO RV/EP-02 and RV700 Self-Piercing Riveters for the FORD Approved Certified Repair Program
FEATURES OF THE CMO RV/EP-02 Ford Approved self-piercing rivet gun for aluminum and steel collision repair
- Electro-Hydraulic Pump - 8 Tons Force
- Automatic retract once set force is obtained
- C-Arm grip handle
- Optional Longer Reach C-Arms are available
- Pressing time regulator
- Complete Push-Pull actuator
- Rivet Removal Dies
- Silent Operation
- Portable use with 18V DC Lithium-Ion Battery or via optional power network cable.
- First of a kind - Complete traceability USB Software for repair documentation printouts
Case with specific dies for Ford, Audi, Mercedes, BMW, Jaguar, Land Rover, Ferrari, Porche, Maserati, Volkswagen, and more...
USER BENEFITS OF THE CMO RV/EP-02 Electro-Hydraulic battery operated riveting system features
- Ford Certified Repair Program Approved Self Piercing Rivet Gun
- Strong light-weight construction
- Compression C-arm rotates 360°
- USB Software verification provides SPR repair reports
- Option of three different compression arms: 40mm (included) *130mm, *240mm * Optional
- Weight 5Kg / 11lbs
- 18V Lithium-Ion battery and charger included
- Set up to use rivet mandrills for Ford, Audi, Mercedes, BMW, Jaguar, Land Rover, Ferrari, Porsche
- Built-In software with end of riveting process proof traceability certificate
Ideal For Automotive Repair Using (SPR) Self-Piercing Rivets and Flow Form Rivets
Quality Engineered & Manufactured in Italy
*Optional Long Reach C-Arms - 130 mm & 240 mm
- Made in steel
- Depth 130 mm (usable on standard piston)
- Made in steel
- Depth 240 mm (usable on standard piston)
|Light and compact pump housing
|From psi 2900-10150
|Compression force adjustment
|3 – 5 sec
|Type of battery
|Rotation of C-frame
|Depth of C-frame
|40 mm, 130 mm, 240 mm
|Acoustic noise level
|dB < 70
|14° F - 122° F
|Usage between battery charges
|≈ 50 min
The Amazing RV700
The CMO RV700 Electronic Controlled Riveter With Digital Riveting Technology
90 kN Adjustable Push Pull Force
Leaves All Other Riveters Behind...
RV700 Self-Piercing Riveter (SPR)
The RV700 Self-Piercing Riveter (SPR) is part of most OEM recommended methods for joining aluminum panels together and/or removing rivets.
The cold-forming technique requires no heat and no pre-drilled holes. The CMO SPR is a reliable tool for riveting aluminum panels together with high dynamic strength. Additionally, with the optional kits to be included, it is possible to install different types of fasteners like blind rivets and rive-nuts, and hole punching.
The RV700 is a battery-operated, hydraulic riveting system that allows the operator to select or adjust the force (kN level) used to insert the fastener based on the type of rivet and OEM recommendations. The pressure and speed controls increase accuracy and enables the rivets to be inserted without panel distortion.
The micro-control system built into the l-pump has the capability to record and download riveting data, create specific programs and generate riveting job reports. The failsafe feature prevents the operator from riveting if there is not enough power in the battery, meaning the unit cannot complete the riveting cycle. On the graphical display, it is possible to review real-time information of the pump, set-up and actual installation force, select pressure, and store custom riveting programs. The instant onscreen graph is able to report whether the rivet has achieved the required pressure during installation.
The system has a light regulatory system and diagnoses when there is a fault with the machine and/or service is required. The l-pump device is equipped with a USB port for downloading recorded riveting data with firmware upgrades.
11lb. pump unit: 11lb. C-Arm Riveter*
Easy to carry
operated at 18V DC 2.0Ah
mains option available. Transformer unit replaces battery pack
Riveting on low battery power failsafe
- Standard C-Arm size 43mm
The body of the pump and all components are made of tested high resistance materials. This riveter tool has been designed to be light, compact, and have a robust structure. It will operate and perform in all work environments with temperatures between -4° F (-20° C) to 122° F (50° C). For strength and durability, the CMO engineers chose to make the casing entirely of insulating, shock-resistant polyamide material, that has also been reinforced with an additional layer of fiberglass.
The technology in this riveter unit enables the adaption of various attachments for different applications. The electro-hydraulic pump is pneumatically driven with a pressure ratio of 1:100. This means that the hydraulic maximum output pressure is 700bar (70 MPa). when the equipment’s preset final pressure is reached, the pump stops automatically and keeps this pressure constant. The system has extremely rapid advancement thanks to a special double piston technology, characterized by a low-pressure advancement and a slow high-pressure advancement, The conversion from low to high pressure takes place automatically at approximately 90bar (9 MPa) and the unit has great reverse capacity for more rapid working cycles.
The hydraulic hose package is connected to the electro-hydraulic pump via a high-pressure hose. The 5-foot (1.5 m) hose is connected to the pump via a leak-free quick-release hydraulic coupling in conformity with the CEJN S115 standard.
The ergonomic remote actuator control integrates the ON, Forward, and Reverse buttons and is additionally equipped with a LED light that provides real-time status diagnoses while the riveter machine is operating. The handset also has a fastening clip and integrated magnetic support to be used when in stand-by.
The HMI control has an integrated intelligent electronic module with a large LCD display and additional LED indicators that provide rapid user information and status of the machine.
The progress of compression can be displayed on the screen that shows pressure measurement, operation time, program number, battery power, and riveting force. The micro-controller control is very simple to use. Selection steps, different phases, and program selection are progressed by using the l-drive knob dial. All the data is saved into the PCB memory on the unit and can be read and downloaded by connecting the supplied mini-USB cable connector. The com port is also used to perform Firmware upgrades and factory setting updates.
The Tool-Software for the RV700 CMO riveter is license-free software that comes with the machine. The riveter Plug & Play auto recognition enables the PC to receive and transmit data, generate job reports, and offer additional support. At last, the traceability software has the ability to incorporate into the reports additional repair details like vehicle type, registration plate, name of the customer, and a short description of the job. This program has a built-in calendar that registers the date and time of each operation the riveter performs with the corresponding values: Counter, Date/ Time, Total running time, Target level, Max level, Chip temperature, error, and warning message.
Optional RV700 Ford Approved Self-Piercing Rivet Gun Accessory
The riveter aims to be a universal tool used when assembling panels with the Self-Piercing Riveting technique. This is a cold joining process used to fasten two or more sheets of material driving a rivet through the layers, installing the rivet onto the vehicle frame. The different mandrils/ dies CMO manufactures are made to suit and fit the different rivet types and sizes OEM requests.
Along with the 43 mm C-Arm that is included in the starter kit, it is also possible to purchase the extra two available arms that are respectively 130 mm and 240 mm in depth. The C-Arms are used when having to rivet parts and places where wider access is needed.
When using blind rivets or nut rivets CMO supplies two additional optional attachments – RVMR / RVMB. Separate data sheets are available for these parts.
Optional Blind Rivet and Nutsert Adapters
*All Logos, names, brands, trademarks, and registered trademarks are the property of their respective owners. They are used for identification purposes only.